Click on the image to check the artwork
Orange dredging pipe float are made of MDPE which is well known for high impact strengh and good flexibilty.The floats are filled with PU foam. This kind of pipe floats has become the preferred products for good impact strength, reasonable struction and easy installation.
- Material: Virgin PE shell with PU foam inside.
- Color: Orange, customized colors
- Inner Diameter: 50mm-1200 (±5mm)
- Outer Diameter: 300-2300mm (±10mm)
- Length: 580mm-2500 (±10mm)
- Wall Thickness: 5-13mm
- Buoyancy: 26kgs-6200kgs
1.Good toughness, excellent impact resistance, especially suitable for offsore construction.
2. Light weight, easy installation and handing, low transportation cost.
3.Corrosion resistance, long service life.
4.Low price, High cost-effective
Xincheng manufactures pipe floats for pipes from 110mm to 1200mm, the standard sizes of floats are as following table.
|
Inner Diameter / mm |
Outer Diameter / mm |
Length / mm |
Wall Thickness/ mm |
Net. Buoyancy / kg |
|
110 |
300 |
580 |
5±1 |
26 |
|
150 |
450 |
900 |
5±1 |
85 |
|
225 |
500 |
800 |
5±1 |
86 |
|
225 |
700 |
600 |
5±1 |
125 |
|
230 |
725 |
610 |
5±1 |
170 |
|
250 |
700 |
900 |
5±1 |
246 |
|
280 |
700 |
1200 |
5±1 |
294 |
|
(280)315 |
850 |
1100 |
5.5±1 |
407 |
|
320 |
900 |
1530 |
5.5±1 |
686 |
|
355 |
1000 |
1000 |
5.5±1 |
527 |
|
355 |
1100 |
1100 |
5.5±1 |
693 |
|
400 |
1100 |
1200 |
5.5±1 |
758 |
|
436 |
1200 |
1200 |
5.5±1 |
842 |
|
450 |
1300 |
1300 |
5.5±1 |
1074 |
|
480 |
1300 |
1400 |
6±1 |
1160 |
|
500 |
1400 |
1400 |
6±1 |
1434 |
|
500 |
1400 |
1500 |
6±1 |
1489 |
|
560 |
1400 |
1500 |
6±1 |
1313 |
|
580 |
1400 |
1600 |
6±1 |
1583 |
|
600 |
1400 |
1700 |
7±1 |
1638 |
|
630 |
1500 |
1800 |
7.5±1 |
1995 |
|
670 |
1500 |
1800 |
7.5±1 |
1915 |
|
700 |
1700 |
2200 |
8±1 |
3210 |
|
710 |
1500 |
1800 |
7.5±1 |
1875 |
|
720 |
1500 |
1600 |
7±1 |
1651 |
|
730 |
1600 |
2000 |
8±1 |
2455 |
|
850 |
1800 |
2200 |
9±1 |
3284 |
|
940 |
2200 |
2500 |
9±1 |
6178 |
|
1066 |
2300 |
2500 |
9±1 |
6132 |
|
1200 |
2300 |
2500 |
10±1 |
5832 |
If you want a smaller or bigger buoyancy, xincheng can design a specific dimension to meet your requirements.
Position One half of floater on the project site
Lift the designeated pipe onto the half (Caution: Do not overturn the half)
Put the second half on the pipe, make sure all locating slots matched well
Install two bolts on the floater as shown in the picture.Not tighten the bolts.
Install the remaining bolts on the floater in sequence as shown in the figure below. Do not tighten the bolts. If there is a deviation in the hole position during installation, shake the floater slightly and then install the bolts.
Tighen all bolts in sequence as shown in the figure
Installation completed.
- Designing and manufacturing of customized dredging pipefloat;
- Repair package for free if any damage occurs;
- Third party inspection accepted;
- OEM / ODM accepted.
http://www.sdxcplastic.com/